BIOS Option Settings |
attribute=BootSeq |
sequence=aliasname1, aliasname2,..... aliasnameN |
|
attribute=HddSeq |
sequence=aliasname1, aliasname2,..... aliasnameN |
Boot Settings |
attribute=BootMode |
setting=Bios | Uefi |
|
attribute=BootSeqRetry |
setting=Enabled | Disabled |
|
attribute=HddFailover
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled |
|
attribute=SetBootOrderFqdd1– SetBootOrderFqdd16
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=<
string>
|
|
attribute=SetLegacyHddOrder Fqdd1–SetLegacyHddOrderFqdd16
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=<
string>
|
Integrated Devices |
attribute=EmbVideo |
setting=Enabled | Disabled |
|
attribute=IntegratedNetwork1 |
setting=Enabled | DisabledOs |
|
attribute=IntegratedNetwork2 |
setting=Enabled | DisabledOs |
|
attribute=IntegratedRaid |
setting=Enabled | Disabled |
|
attribute=IntegratedSas |
setting=Enabled | Disabled |
|
attribute=InternalSdCard |
setting=On | Off |
|
attribute=InternalSdCardRedundancy |
setting=Mirror | Disabled |
|
attribute=InternalUsb |
setting=On | Off |
|
attribute=IoatEngine |
setting=Enabled | Disabled |
|
attribute=OsWatchdogTimer |
setting=Enabled | Disabled |
|
attribute=SriovGlobalEnable |
setting=Enabled | Disabled |
|
attribute=UsbPorts |
setting=AllOn | OnlyBackPortsOn | AllOff |
|
attribute=Usb3Setting
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Auto | Enabled | Disabled |
|
attribute=InternalSdCardPrimaryCard
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=SdCard1 | SdCard2 |
|
attribute=CurrentEmbVideoState
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled |
Memory Settings |
attribute=MemOpMode |
setting=OptimizerMode | SpareMode | MirrorMode
| AdvEccMode | SpareWithAdvEccMode
|
|
attribute=MemTest |
setting=Enabled | Disabled |
|
attribute=NodeInterleave |
setting=Enabled | Disabled |
|
attribute=SysMemSize |
setting=<
string>
|
|
attribute=SysMemSpeed |
setting=<
string>
|
|
attribute=SysMemType |
setting=<
string>
|
|
attribute=SysMemVolt |
setting=<
string>
|
|
attribute=VideoMem |
setting=<
string>
|
|
attribute=ClusterOnDie
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled |
Miscellaneous Settings |
attribute=AssetTag |
setting=<
string>
|
|
attribute=NumLock |
setting=On | Off |
|
attribute=ErrPrompt |
setting=Enabled | Disabled |
|
attribute=SysMgmtNVByte1 |
setting=<
string>
|
|
attribute=SysMgmtNVByte1 |
setting=<
string>
|
|
attribute=CorrEccSmi |
setting=Enabled | Disabled |
|
attribute=InSystemCharacterization
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=FastBoot | OptimizedBoot | Disabled |
|
attribute=ReportKbdErr |
setting=Report | NoReport |
|
attribute=SystemUefiShell |
setting=Enabled | Disabled |
|
attribute=ForceInt10
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled |
Network Settings
-
NOTE: The option is supported
only on 13G and later systems.
|
attribute=PxeDev1EnDis - PxeDev4EnDis |
setting=Enabled | Disabled |
|
attribute=PxeDev1Interface - PxeDev4Interface |
setting=Enabled | Disabled |
|
attribute=PxeDev1Protocol - PxeDev4Protocol |
setting=IPv4 | IPv6 |
|
attribute=PxeDev1VlanEnDis - PxeDev4VlanEnDis |
setting=Enabled | Disabled |
|
attribute=PxeDev1VlanId - PxeDev4VlanId |
setting=<
integer>
|
|
attribute=PxeDev1VlanPriority - PxeDev4VlanPriority
-
NOTE: Configuration of virtual LAN (VLAN) interfaces are not displayed
on Server Administrator Network Settings.
|
setting=<
integer>
|
One-Time Boot
-
NOTE: The option is not supported
on Dell PowerEdge 13G and later systems.
|
attribute=OneTimeBootMode |
setting=Disabled | OneTimeBootSeq | OneTimeHddSeq
| OneTimeUefiBootSeq | OneTimeCustomBootSeqStr | OneTimeCustomHddSeqStr
| OneTimeCustomUefiBootSeqStr
|
|
attribute=OneTimeBootSeqDev |
sequence=aliasname1, aliasname2,..... aliasnameN |
|
attribute=OneTimeHddSeqDev |
sequence=aliasname1, aliasname2,..... aliasnameN |
|
attribute=OneTimeUefiBootSeqDev |
sequence=aliasname1, aliasname2,..... aliasnameN |
Processor Settings |
attribute=ControlledTurbo |
setting=Enabled | Disabled | Custom |
|
attribute=DataReuse |
setting=Enabled | Disabled |
|
attribute=DcuIpPrefetcher |
setting=Enabled | Disabled |
|
attribute=DcuStreamerPrefetcher |
setting=Enabled | Disabled |
|
attribute=LogicalProc |
setting=Enabled | Disabled |
|
attribute=Proc1Brand |
setting=<
string>
|
|
attribute=Proc1Id |
setting=<
string>
|
|
attribute=Proc1L2Cache |
setting=<
string>
|
|
attribute=Proc1L3Cache |
setting=<
string>
|
|
attribute=Proc1NumCores |
setting=<
integer>
|
|
attribute=Proc2Brand |
setting=<
string>
|
|
attribute=Proc2Id |
setting=<
string>
|
|
attribute=Proc2L2Cache |
setting=<
string>
|
|
attribute=Proc2L3Cache |
setting=<
string>
|
|
attribute=Proc2NumCores |
setting=<
integer>
|
|
attribute=Proc64bit |
setting=<
string>
|
|
attribute=ProcAdjCacheLine |
setting=Enabled | Disabled |
|
attribute=ProcBusSpeed |
setting=<
string>
|
|
attribute=ProcCores |
setting=Single | All | Dual | Quad | 1 | 2 | 4
| 6 | 8 | 10 | 12 | 14 | 16
|
|
attribute=ProcCoreSpeed |
setting=<
string>
|
|
attribute=ProcExecuteDisable |
setting=Enabled | Disabled |
|
attribute=ProcHwPrefetcher |
setting=Enabled | Disabled |
|
attribute=ProcVirtualization |
setting=Enabled | Disabled |
|
attribute=QpiBandwidthPriority |
setting=InputOutput | Compute |
|
attribute=QpiSpeed |
setting=MaxDataRate | 8GTps | 7GTps | 6GTps |
|
attribute=RtidSetting |
setting=Enabled | Disabled |
|
attribute=Proc1ControlledTurbo – Proc4ControlledTurbo
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Disabled | ControlledTurboLimit | ControlledTurboLimitMinus1
| ControlledTurboLimitMinus2 | ControlledTurboLimitMinus3
|
|
attribute=ProcConfigTdp
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Nominal | Level1 | Level2 |
|
attribute=ProcATS |
setting=Enabled | Disabled
-
NOTE: The option is read-only
if
ProcVirtualization is set to
Disabled.
|
|
attribute=ProcX2Apic
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled
-
NOTE: The option is read-only
if
ProcVirtualization is set to
Disabled.
|
SATA Settings |
attribute=EmbSata |
setting=Off | AtaMode | RaidMode | AhciMode |
|
attribute=eSataPort1 |
setting=Off | Auto |
|
attribute=eSataPort1Capacity |
setting=<
string>
|
|
attribute=eSataPort1DriveType |
setting=<
string>
|
|
attribute=eSataPort1Model |
setting=<
string>
|
|
attribute=SataPortA - SataPortJ |
setting=Off | Auto |
|
attribute=SataPortACapacity - SataPortJCapacity |
setting=<
string>
|
|
attribute=SataPortADriveType - SataPortJDriveType |
setting=<
string>
|
|
attribute=SataPortAModel - SataPortJModel |
setting=<
string>
|
|
attribute=SecurityFreezeLock |
setting=Enabled | Disabled |
|
attribute=WriteCache |
setting=Enabled | Disabled |
Serial Communication |
attribute=ConTermType |
setting=Vt100Vt220 | Ansi |
|
attribute=ExtSerialConnector |
setting=Serial1 | Serial2 | RemoteAccDevice |
|
attribute=FailSafeBaud |
setting=115200 | 57600 | 19200 | 9600 |
|
attribute=RedirAfterBoot |
setting=Enabled | Disabled |
|
attribute=SerialComm |
setting=OnNoConRedir | OnConRedirCom1 | OnConRedirCom2
| Off
|
|
attribute=SerialPortAddress |
setting=Serial1Com1Serial2Com2 | Serial1Com2Serial2Com1
| Com1 | Com2
|
Slot Disablement |
attribute=Slot
n
|
setting=Enabled | Disabled | BootDriverDisabled |
System Information |
attribute=SysMfrContactInfo |
setting=<
string>
|
|
attribute=SystemBiosVersion |
setting=<
string>
|
|
attribute=SystemManufacturer |
setting=<
string>
|
|
attribute=SystemModelName |
setting=<
string>
|
|
attribute=SystemServiceTag |
setting=<
string>
|
|
attribute=SystemMeVersion
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=<
string>
|
|
attribute=UefiComplianceVersion
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=<
string>
|
|
attribute=SystemCpldVersion |
setting=<
string>
|
System Profile Settings |
attribute=MemFrequency |
setting=MaxPerf |1866MHz | 1600MHz | 1333MHz
|1067MHz | 800MHz | MaxReliability
|
|
attribute=MemPatrolScrub |
setting=Standard | Extended | Disabled |
|
attribute=MemRefreshRate |
setting=1x | 2x |
|
attribute=MemVolt |
setting=AutoVolt | Volt15V | Volt135V
-
NOTE: Volt15V represents
1.5 Volt and Volt135V represents 1.35 Volt
|
|
attribute=ProcC1E |
setting=Enabled | Disabled |
|
attribute=ProcCStates |
setting=Enabled | Disabled |
|
attribute=ProcPwrPerf |
setting=MaxPerf | MinPwr | SysDbpm | OsDbpm |
|
attribute=ProcTurboMode |
setting=Enabled | Disabled |
|
attribute=SysProfile |
setting=PerfPerWattOptimizedOs | PerfPerWattOptimizedDapc
| PerfOptimized | Custom | DenseCfgOptimized
|
|
attribute=EnergyEfficientTurbo
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled |
|
attribute=EnergyPerformanceBias
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=MaxPower | BalancedPerformance | BalancedEfficiency
| LowPower
|
|
attribute=UncoreFrequency
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=DynamicUFS | MaxUFS | MinUFS |
|
attribute=ProcNTurboCoreNum (N= 0-3) , where the
value of N is 0–3.
-
NOTE: The option is supported only on 13G and later systems.
|
setting=All | 1 | 2 | 4 | 6 | 8 | 10 | 12 | 14
| 16 | 18
|
|
attribute=MonitorMwait |
setting=Enabled | Disabled |
|
attribute=CollaborativeCpuPerfCtrl |
setting=Enabled | Disabled |
System Security |
attribute=AcPwrRcvry |
setting=On | Off | Last |
|
attribute=AcPwrRcvryDelay |
setting=Immediate | User | Random |
|
attribute=AcPwrRcvryUserDelay |
setting=<
integer>
|
|
attribute=AesNi |
setting=Enabled | Disabled |
|
attribute=IntelTxt |
setting=On | Off |
|
attribute=NmiButton |
setting=Enabled | Disabled |
|
attribute=PasswordStatus |
setting=Locked | Unlocked |
|
attribute=PwrButton |
setting=Enabled | Disabled |
|
attribute=SetupPassword |
setting=<
string>
|
|
attribute=SysPassword |
setting=<
string>
|
|
attribute=TpmActivation
-
NOTE: The option is not supported
on Dell PowerEdge 13G and later systems.
|
setting=NoChange | Activate | Deactivate |
|
attribute=TpmClear
-
NOTE: The option is not supported
on Dell PowerEdge 13G and later systems.
|
-
CAUTION: Clearing the TPM will cause loss of all keys in the
TPM. This could affect booting of the operating system.
setting=Yes
| No
|
|
attribute=TpmSecurity |
setting=Off | OnPbm | OnNoPbm |
|
attribute=TpmInfo
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=<
string>
|
|
attribute=TpmCommand
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=None | Activate | Deactivate | Clear |
|
attribute=TpmStatus |
setting=<
string>
|
|
attribute=TcmActivation
-
NOTE: The option is not supported
on Dell PowerEdge 13G and later systems.
|
setting=NoChange | Activate | Deactivate |
|
attribute=TcmClear
-
NOTE: The option is not supported
on Dell PowerEdge 13G and later systems.
|
-
CAUTION: Clearing the TCM will cause loss of all keys in the
TCM. This could affect booting of the operating system.
setting=Yes
| No
|
|
attribute=TcmSecurity
-
NOTE: The option is not supported
on Dell PowerEdge 13G and later systems.
|
setting=Off | OnPbm | OnNoPbm |
|
attribute=SecureBoot
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled |
|
attribute=SecureBootPolicy
-
NOTE: The option is supported
only on 13G and later systems.
|
setting=Enabled | Disabled |
|
attribute=UefiVariableAccess |
setting=Standard | Controlled |
UEFI Boot Settings |
attribute=UefiBootSeq |
sequence=aliasname1, aliasname2,..... aliasnameN |